128 CA1
EN ISO 14341-A G 42 4 M21 2Si
EN ISO 14341-A G 42 4 C1 2Si
AWS A5.18 ER70S-3
CSA W48 B-G 49A 2 C G3
DESCRIPTION
Copper coated solid wire for MIG/MAG welding of carbon steels. Used for general carpentry, storage tanks and shipbuilding. To be used with shielding gas EN ISO 14175-C1 (CO2) or EN ISO 14175-M20-M21-M33 (Ar/CO2 and Ar/CO2/O2) mixtures.
| CHEMICAL COMPOSITION | MECHANICAL PROPERTIES OF THE DEPOSIT | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C | Mn | Si | Mo | Ni | Cr | Cu | V | Rm | Rs | A % | ISO-V KV | |
| 0,06-0,09 | 1,00-1,30 | 0,50-0,70 | - | - | - | - | - | 540 | 440 | 30 | 80J @ -20°C | 60J @ -40°C |
128 CA2
EN ISO 14341-A G 42 4 M21 3Si1
EN ISO 14341-A G 42 4 C1 3Si1
AWS A5.18 ER70S-6
CSA W48 B-G 49A 5 C G6
DESCRIPTION
Copper coated solid wire for MIG/MAG welding of carbon steels. Used for structural steel constructions. To be used with shielding gas EN ISO 14175-C1 (CO2) or EN ISO 14175-M20-M21-M33 (Ar/CO2 and Ar/CO2/O2) mixtures.
| CHEMICAL COMPOSITION | MECHANICAL PROPERTIES OF THE DEPOSIT | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C | Mn | Si | Mo | Ni | Cr | Cu | V | Rm | Rs | A % | ISO-V KV | |
| 0,06-0,08 | 1,40-1,50 | 0,80-0,90 | - | - | - | - | - | 560 | 460 | 30 | 80J @ -20°C | 60J @ -40°C |
128 CA3
EN ISO 14341-A G 46 5 M21 4Si1
EN ISO 14341-A G 46 C1 4Si1
AWS A5.18 ER70S-6
CSA W48 B-G 49A 5 C G6
DESCRIPTION
Copper coated solid wire for MIG/MAG welding of carbon steels, with higher Mn and Si content for better deoxidising properties and greater mechanical properties. Improved weld bead appearance even at high welding parameters. To be used with shielding gas EN ISO 14175-C1 (CO2) or EN ISO 14175-M20-M21-M33 (Ar/CO2 and Ar/CO2/O2) mixtures.
| CHEMICAL COMPOSITION | MECHANICAL PROPERTIES OF THE DEPOSIT | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C | Mn | Si | Mo | Ni | Cr | Cu | V | Rm | Rs | A % | ISO-V KV | |
| 0,065-0,08 | 1,60-1,70 | 0,90-1,00 | - | - | - | - | - | 600 | 500 | 26 | 80J @ -20°C | 50J @ -50°C |
128 80
EN ISO 16834-A G 55 4 M21 Mn3NiCrMo
AWS A5.28 ER80S-G
DESCRIPTION
Copper coated solid wire for MAG welding of high-strength steels. Also suitable for welding steels where good toughness at low temperatures is required. To be used with shielding gas EN ISO 14175-M20-M21-M33 (Ar/CO2 and Ar/CO2/O2) mixtures.
| CHEMICAL COMPOSITION | MECHANICAL PROPERTIES OF THE DEPOSIT | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C | Mn | Si | Mo | Ni | Cr | Cu | V | Rm | Rs | A % | ISO-V KV | |
| 0,07-0,10 | 1,30-1,50 | 0,65-0,80 | 0,20-0,30 | 0,50-0,60 | 0,45-0,60 | - | - | 705 | 605 | 25 | 120J @ -20°C | 80J @ -40°C |
128 90
EN ISO 16834-A G 62 4 M21 Mn3NiCrMo
AWS A5.28 ER100S-G
DESCRIPTION
Copper coated solid wire for MAG welding of high-strength steels. Also suitable for welding steels where good toughness at low temperatures is required. To be used with shielding gas EN ISO 14175-M20-M21-M33 (Ar/CO2 and Ar/CO2/O2) mixtures.
| CHEMICAL COMPOSITION | MECHANICAL PROPERTIES OF THE DEPOSIT | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C | Mn | Si | Mo | Ni | Cr | Cu | V | Rm | Rs | A % | ISO-V KV | |
| 0,08-0,11 | 1,60-1,80 | 0,70-0,80 | 0,20-0,30 | 0,50-0,60 | 0,55-0,65 | - | - | 740 | 640 | 19 | 110J @ -20°C | 70J @ -40°C |
128 100
EN ISO 16834-A G 69 4 M21 Mn3Ni1CrMo
AWS A5.28 ER110S-G
DESCRIPTION
Copper coated solid wire for the GMAW of high strength steels. Also suitable for welding steels when good impact strength at lower temperature is required. To be used with both Ar/CO2 and Ar/CO2/O2 shielding gas.
| CHEMICAL COMPOSITION | MECHANICAL PROPERTIES OF THE DEPOSIT | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C | Mn | Si | Mo | Ni | Cr | Cu | V | Rm | Rs | A % | ISO-V KV | |
| 0,06-0,10 | 1,50-1,70 | 0,50-0,70 | - | 1,40-1,60 | 0,30-0,40 | 0,20-0,30 | 0,08-0,10 | 780 | 690 | 23 | 110J @ -20°C | 70J @ -40°C |
128 Mo
EN ISO 14341-A G 50 4 M21 4Mo
AWS A5.28 ER80S-D2
CSA W48 B-G 55A 5 M G4M31
DESCRIPTION
Copper coated solid wire for MIG/MAG welding of weakly alloyed creep resistant steels and high temperature steels (up to 500°C), with high levels of Manganese and Silicon for guaranteeing high deoxidising properties. he 0.5% Mo provides high mechanical properties to the deposit at high temperatures. To be used with shielding gas EN ISO 14175 M21-M33 (Ar/CO2 and Ar/CO2/O2) mixtures.
| CHEMICAL COMPOSITION | CARATTERISTICHE MECCANICHE DEL DEPOSITO | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C | Mn | Si | Mo | Ni | Cr | Cu | V | Rm | Rs | A % | ISO-V KV | |
| 0,07-0,10 | 1,70-1,95 | 0,60-0,80 | 0,40-0,60 | - | - | - | - | 730 | 590 | 21 | 60J @ -30°C | 50J @ -50°C |
128 Re
EN ISO 14341-A G 46 4 M21 Z
AWS A5.28 ER80S-G
DESCRIPTION
Copper coated solid wire for GMAW welding of atmospheric corrosion-resistant structural steels. The copper and nickel content allows for increasing atmospheric corrosion resistance in the weld bead. It can also be used for welding high-strength steels. It can also be used for welding high-strength steels. To be used with shielding gas EN ISO 14175-C1 (CO2) and EN ISO 14175-M20-M21 (Ar/CO2) mixtures.
| CHEMICAL COMPOSITION | MECHANICAL PROPERTIES OF THE DEPOSIT | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C | Mn | Si | Mo | Ni | Cr | Cu | V | Rm | Rs | A % | ISO-V KV | |
| 0,06-0,10 | 1,30-1,50 | 0,70-0,90 | - | 0,70-0,90 | 0,25-0,35 | 0,25-0,40 | - | 620 | 530 | 22 | 80J @ -20°C | 60J @ -40°C |
128 Ni1
EN ISO 14341-A G 46 6 M21 3Ni1
AWS A5.28 ER80S-Ni1
DESCRIPTION
Copper coated solid wire for GMAW welding of atmospheric corrosion-resistant structural steels. The copper and nickel content allows for increasing atmospheric corrosion resistance in the weld bead. It can also be used for welding high-strength steels. It can also be used for welding high-strength steels. To be used with shielding gas EN ISO 14175-C1 (CO2) and EN ISO 14175-M20-M21 (Ar/CO2) mixtures.
| CHEMICAL COMPOSITION | MECHANICAL PROPERTIES OF THE DEPOSIT | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C | Mn | Si | Mo | Ni | Cr | Cu | V | Rm | Rs | A % | ISO-V KV | |
| 0,07-0,10 | 1,00-1,25 | 0,50-0,80 | - | 0,80-1,00 | - | - | - | 570 | 480 | 28 | 115J @ -30°C | 47J @ -60°C |
128 CA2 BRZ
EN ISO 14341-A G 42 4 M21 3Si1
EN ISO 14341-A G 42 4 C1 3Si1
AWS A5.18 ER70S-6
CSA W48 B-G 49A 5 C G6
DESCRIPTION
Bronze-plated solid wire for MIG/MAG welding of carbon steels. Used for structural steel constructions. To be used with shielding gas EN ISO 14175-C1 (CO2) or EN ISO 14175-M20-M21-M33 (Ar/CO2 and Ar/CO2/O2) mixtures.
| CHEMICAL COMPOSITION | MECHANICAL PROPERTIES OF THE DEPOSIT | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C | Mn | Si | Mo | Ni | Cr | Cu | V | Rm | Rs | A % | ISO-V KV | |
| 0,06-0,08 | 1,40-1,50 | 0,80-0,90 | - | - | - | - | - | 560 | 460 | 30 | 80J @ -20°C | 60J @ -40°C |
128 CA3 BRZ
EN ISO 14341-A G 46 5 M21 4Si1
EN ISO 14341-A G 46 C1 4Si1
AWS A5.18 ER70S-6
CSA W48 B-G 49A 5 C G6
DESCRIPTION
Bronze-coated solid wire for MIG/MAG welding of carbon steels. Bronze-coated solid wire with high Mn and Si content for ensuring improved mechanical and anti-oxidising properties. To be used with shielding gas EN ISO 14175 C1 (CO2) or EN ISO 14175-M20-M21-M33 (Ar/CO2 and Ar/CO2/O2) mixtures.
| CHEMICAL COMPOSITION | MECHANICAL PROPERTIES OF THE DEPOSIT | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C | Mn | Si | Mo | Ni | Cr | Cu | V | Rm | Rs | A % | ISO-V KV | |
| 0,06-0,09 | 1,00-1,30 | 0,50-0,70 | - | - | - | - | - | 600 | 500 | 26 | 80J @ -20°C | 50J @ -50°C |
128 90 BRZ
EN ISO 16834-A G 62 4 M21 Mn3NiCrMo
AWS A5.28 ER100S-G
DESCRIPTION
Bronze-coated solid wire for MAG welding of high-strength steels. Also suitable for welding steels where good toughness at low temperatures is required. To be used with shielding gas EN ISO 14175-M20-M21-M33 (Ar/CO2 and Ar/CO2/O2) mixtures.
| CHEMICAL COMPOSITION | MECHANICAL PROPERTIES OF THE DEPOSIT | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C | Mn | Si | Mo | Ni | Cr | Cu | V | Rm | Rs | A % | ISO-V KV | |
| 0,065-0,08 | 1,60-1,70 | 0,90-1,00 | - | - | - | - | - | 740 | 640 | 19 | 110J @ -20°C | 70J @ -40°C |
* Typical values of mechanical properties are obtained from tests in accordance with the reference standard, these results should not be taken as valid in particular applications or welded parts. Please refer to the product data sheet for more information.